Saipem Contracting Nigeria Limited, is a global leader in the Engineering, Procurement, Construction & Installation businesses, with a strong bias towards oil & gas-related activities in remote areas We excel in the provisioning of engineering, procurement, project management and construction services, with distinctive skills and capabilities in the design and execution àf large-scale offshore and onshore projects

We are recruiting to fill the position below:

Job Position: Welding Equipment Leader (Assets Superintendent)

Reference Code: ASTWE

Responsibilities/Requirements

• Ensure welding process equipment and pipeline equipment installation and maintenance onboard as per project requirements
• Collect feedback information regarding functionality/usability/reliability of Welding production equipment, production equipment and Pipeline equipment in order to propose improvements.
• Hold Company certification, training matrix and functional matrix

Qualification and Experience

• A degree in Mechanical or Materials Engineering with a minimum of 8 years in experience in welding equipment management.

Job Position: Mechanical Work Manager - Superintendent

Reference Code: MCHWKS

Responsibilities/Requirements

• Perform Instrumentation 3D modelling design activities and participate in 3D Modelling reviews
• Initiate P and ID general legend sheets for equipment, piping and instrumentation.
• Create typical piping arrangements to be standardized for P and ID homogenization and consistency
• Ensure development of P and ID based on process PFD cut and apply proper engineering general criteria and guidelines
• Participate in the collective P and ID review with Process and Engineering Disciplines
• Ensure total traceability of P and ID modifications
• Participate in site surveys for revamping projects to collect as-built information on PIDs, when necessary
• Perform thermal design of shell and tubes heat exchangers and develop thermal datasheets accordingly
• Be involved in the review of vendor documentation (PFDs, process datasheets, narratives, P and ID5, utility balances, etc)

Qualification and Experience

• A Degree in Chemical/Process Engineering with a minimum of 5 years relevant experience in the oil and gas industry..

Job Position: Non Destructive Testing Co-ordinator

Reference Code: NDTCOD
Slot: 2

Responsibilities/Requirements

• Manage NDT team by allocating personnel on projects or site activities, perform induction hands on job and, in case of needs, can request training and/or new recruitment of NDT personnel to Corporate functions
• Provide feedback about specific occurred cases to corporate functions so that can be used as case study in R&D.
• Provide answer and advice on all NDT matters as required by projects.
• Deal with Third Parties, Quality Control Manager, Supervisors on site and Corporate functions for what concerns NDT matters
• Follow and liaise with Corporate/Engineering for NDT qualification
  Session
• Provide NDT techniques, write and revise NDT procedures following QC NDT Templates and liaising with Corporate and Engineering
• Ensure the coordination and supervision of NDT activities of projects for the area of competence

Qualification and Experience

• A degree in Chemical/Mechanical Engineering or Nuclear physics with a minimum of 10 years’ relevant experience. ASNT NDT Level III certificate is required.

Job Position: Oil & Gas Equipment Specialist

Reference Code: OGAS
Slot: 3

Responsibilities/Requirements

• Experience in the Utilities and Offsite area both onshore and offshore
• Proven experience in the preparation of FEED and execution of EPC for large projects
• Knowledge and experience in simulation programs (i.e. HYSYS) both for steady and dynamic states and specific commercial tools (Flarenet, Flaresim)
• Preparation of Utilities Flow Diagrams, Simulations for Heat and Material Balances, Process sizing calculations (Drums, Columns, Pumps, Piping, etc.), Process Data Sheets for equipment, Duty specification for packages (Water treatment packages, etc.).
• Process sizing calculations for Vessels, Columns, Pumps, Compressors, Heat Transfer Equipment, Piping, Control Valves, Safety Valves, etc.
• Preparation of Process Flow Diagrams, Heat and Material Balances, Material Selection Diagrams, Process Data Sheets for equipment and instrumentation, Cause and Effect Matrix

Qualification and Experience

• A degree in Gas Engineering/Petrochemical with 7 years relevant experience.

Job Position: Onshore Construction Manager-Plants

Reference Code: OCM

Responsibilities/Requirements

• Ensure the direction of Plant project construction activities, both performed by subcontractors or in Direct Hiring, supervising multidisciplinary construction works according to contract requirements and project objectives
• Ensure the implementation of HSE procedures for construction and pre-commissioning of plants
• Give guidelines for the definition of construction strategies, such as subcontracting plans, logistic and constructability studies, during the various stages of the project
• Review of contractual documents construction related and interfacing with other project functions.
• Participate in defining the overall project planning and scheduling for construction activities, with the support of the expertise of construction organization key positions
• ensure that activities are carried out within the planned time and costs, coordinating and instructing construction team accordingly and intervening with corrective actions in case of deviations or difficulties
• Analyze all information regarding the progress of works, indicating the causes of deviations between the program and the work carried out and propose solutions and/or request instructions to overcome these problems
• Ensure effective interdisciplinary coordination verifying adequacy and consistency of construction strategies.
• Coordinate the execution of multidisciplinary construction activities and manage activities assigned to subcontractors, providing the guidelines for execution of the works and monitoring adequacy of manpower and equipment to manage construction activities
• Manage interface with Clients for all matters relevant to construction activities
• Manage interface with engineering departments for drawings and materials availability
• Ensure/manage the Mechanical Completion activity by System & Sub-System as clearly identified by Commissioning Manager, monitoring the schedule, Quality certification, punch list, up to final handover to Commissioning /Client

Qualification and Experience

• A degree in Engineering with a minimum of 10 years’ relevant experience in the energy sector.

Job Position: Onshore Steel Works Supervisor Civil (Tekla)

Reference Code: OSWS

Responsibilities/Requirements

• Supervise the Set up and execution of assigned engineering activities such as detail design verification and studies relevant to Steel Structures
• Assist subcontractors or assigned resources in the interpretation of the drawings and providing support
• Prepare design specifications.
• Verify that works are correctly carried out in accordance with project specifications, highlighting any engineering problems encountered in the field
• Develop studies and calculation notes for steel structures and structural steel buildings.
• Measure the progress of the works carried out
• Prepare MTO, BOQ, S.O.W. and technical specification for steel structure sub-contract.
• Prepare technical documentation for steel structure material requisition and assist procurement department in the technical evaluations.
• Monitor steel vendors to follow up engineering activities in order to minimize interface time.

Qualification and Experience

• A degree in Civil/Structural Engineering with a minimum of 8 years relevant experience.

Job Position: Process Specialist Leader

Reference Code: PSLE
Slot: 4

Responsibilities/Requirements

• Development of engineering activities for pipeline transport/plant system (i.e. well heads, production and injection gatherings, pipelines, compressor and pumping stations and pipeline receiving terminals and storage)
• Development of flow assurance simulation for single and multiphase transport in pipeline for pipeline sizing and transport system process scheme definition

Qualification and Experience

• A Mechanical/Chemical/Petroleum Engineering Degree with 5 years of experience and exposure to Process Design relevant to Oil & Gas activities.

Job Position: Procurement Section Leader / Vendor Management Specialist

Reference Code: PVMS

Responsibilities/Requirements

• Define/approve bidder list taking into account project and operating requirements, market knowledge and other possible internal needs.
• Supervise commercial/economic negotiation
• Support and coordinate procurement processes on a day-to-day basis.
• Promote market price surveys and lead in defining benchmarks
• Check the technical documentation received with the Purchase Requisition and Technical evaluation
• Support the Buyer during feedback activities
• Perform qualification of suppliers of goods and services, guaranteeing that the needed requirements are fulfilled in terms of technical competence, financial strength, organization, quality and safety, risk management, social responsibility
• Support the management of Vendor Data Base and Corporate commodity tree

Qualification and Experience

• A degree in Engineering with at least 5 years of working experience in a construction outfit.

Job Position: Structural Installation Superintendent

Reference Code: SISP

Responsibilities/Requirements

• For installation activities he is to ensure the achievement of the established cost, time, quality, health and safety objectives in order to meet the contractual obligations
• Ensure that planning activities of installation are performed, liaising with other organizations and functions involved in the project execution
• Define project strategies (e.g. Project Execution Plan, Quality Plan, Procurement Plan), ensuring the project activity planning
• Supervise engineering and procurement activities supported by the other project organization roles
• Supervise site/yard and offshore installation activities
• Ensure the implementation of methodologies related to risk and knowledge management

Qualification and Experience

• A degree in Civil/Structural Engineering Degree or Higher National Diploma, with a minimum of about 8 years relevant experience in the oil and gas sector.

Job Position: Quality Control Coating & Painting Instructor

Reference Code: QCCP
Slot: 2

Responsibilities/Requirements

• Training of Site personnel on issues of quality as it is relevant to Coating and Painting works
• Check Quality Control Plans with reference to Coating and Painting activities
• Awareness of Coating and Painting procedure and qualification, Check Coating and Painting qualification
• Allocate and coordinate Coating and Painting QC Inspectors within the various areas of Site activities.
• Check the availability and adequacy of consumables and equipment/instrumentation used for Coating and Painting execution and control.
• Ensure that material and equipment are correctly received, stored, preserved and handled, identified and traceable
• Supervise the Construction Quality Control functions/activities related to Coating and Painting disciplines, including Quality Control inspection schedules and the collection of Quality Records.
• Evaluate the qualifications of inspection personnel in charge of works, verify work procedures, including those relating to special processes
• Supervise and witness inspections, check reports and documentation issued by inspectors and collect the required Quality Records
• Implement the inspection, control and test notification process (RFI)
• Ensure that the tests, controls and inspections are carried out according to Quality Control Plans/Inspection Test Plans, obtain and collect the relevant documentation also for the purpose of approvals of completion, and that personnel have access to all required project documentation
• Orderly collect and manage/check documents certifying test, controls and inspections documents, ensuring that all Coating and Painting records are properly retrievable within the final As-Built dossier.
• Ensure, whenever necessary, the update of project Quality Control Plans and procedures
• Ensure the preparation of the Quality coating and Painting works dossier for final hand over to the Client

Qualification and Experience

• A degree in Engineering with at least, 5 years working experience. NACE peer review certificate is required.

Job Position: Schedule/Risk Engineer

Reference Code: SRE
Slot: 2

Responsibilities/Requirements

• Create a risk surveillance awareness atmosphere among all projects participants, ensuring that risks and opportunities are carefully managed and reported in terms of impact and probability.
• Assist the Project Manager in the application of the Risk and Opportunity and Knowledge Management Methodology ensuring appropriate strategies is planned well ahead of the problem occurrence reducing the incidence of surprises.
• Perform risk analysis for highly different phases of the projects.

Qualification and Experience

• A degree in Engineering with at least, 5 years working experience.

Job Position: Instrument Design & P & ID Specialist

Reference Code: SMAUT

Responsibilities/Requirements

• Perform Instrumentation 3D modelling design activities and participate in 3D Modelling reviews
• Initiate P and ID general legend sheets for equipment, piping and instrumentation.
• Create typical piping arrangements to be standardized for P and ID homogenization and consistency
• Ensure development of P and ID based on process PFD cut and apply proper engineering general criteria and guidelines
• Participate in the collective P and ID review with Process and Engineering Disciplines
• Ensure total traceability of P and ID modifications
• Participate in site surveys for revamping projects to collect as-built information on PIDs, when necessary
• Perform thermal design of shell and tubes heat exchangers and develop thermal datasheets accordingly
• Be involved in the review of vendor documentation (PFDs, process datasheets, narratives, P and ID5, utility balances, etc)

Qualification and Experience:

A Degree in Chemical/Process Engineering with a minimum of 5 years relevant experience in the oil and gas industry.

Interested and qualified candidates should send their applications and resume using the job reference code as email subject. (E.g. Welding Equipment Leader (Assets Superintendent)-ASTWE)